Ten tips though not confusing and complicated, but certainly will help you take better pictures. Whether you are a novice or have a practice photography as a factory hand experience, the following principles are essential and will definitely help a lot to have a beautiful picture.
Probably everyone who has read or heard this somewhere, but how to apply them properly so that is also a problem. This article will try to help you reach out to them in a simple and understandable as possible.
The structure of the three
To use this layout, imagine the 4 lines on the frame. The two horizontal lines and two vertical lines, each line in third place or 2/3 frames. Four lines will be divided into nine equal parts form. We will pay close attention to the intersection of four roads, or in other words the four vertices of the rectangle in the center of the photo.
Now put the subject to take on one of the four points which, depending on your intentions. The layout of this type are very common, and is one of the basic principles, also known as the "golden ratio" in painting. A photo layout third type looks very broad, liberal and eye-catching. The reason is because our eyes are always watching, and impressed on the point lies in the first place when viewing a picture. Of course, in some cases, or to portray a special intention of the author, the subject compositions in the middle of the picture is very beautiful. However, if you are new to photography, it's best to set the layout third type first.
Avoid camera shake
Vibration machine is a bad thing no matter how any amateur photographers and professionals alike are also obsessed. This happens due to many reasons, may be due to long exposure, also due to the impact of physical objectivity of the external environment, there are so many people so nervous trembling hands. But they all have one thing in common is going to blur the picture, very wasteful.
To control this unfortunate incident, you first need to set the habit sure grip. Hold the camera firmly with both hands, a hand grip section has grip body, keeping your other hand under the lens, remember this hand set as close as possible to the machine body is the best balance. Second, you must understand the harmony between the border and speed. In some cases, lack of light, if too small gate open, the machine will automatically adjust the shutter long time, making it easy to blurry images. Finally, you should note that the telephoto lens is prone to vibration, even if there IS or VR.For example, when using a 100mm lens, to ensure that the rate should not exceed 1 / 100s. Ideally, if possible, or shop for a tripod, or make use of the property as trunk transport, or wall for support.
Law "Sunny 16"
True to its name, this rule should only apply when you are shooting outdoor scenes in sunny conditions. If this is the case, set the aperture to f / 16 and the speed of 1 / 100s to take (ISO set to 100). In most cases, the image will very sharp, bright enough, not burnt nor dark. This trick has been applied photographers so long to film machine, which has no LCD screen for playback, and no metering modes modern DSLRs today.
Using polarized filters
If your financial circumstances do not get abundant, and only enough to buy a single filter, then think of the polarizer (Polarizer filter). This type of image becomes "dress" more color, and reduce the light reflection of the water, the trees, especially metal and glass. You'll see the color of the sky and foliage becomes green, and more close to the real color. In addition, the filter also protects the lens of your expensive from scratch, and the rays of the sun is too strong. This type of filter is quite common, and you can mount it on a permanent lens in all circumstances, it must be remembered that when the metering mode is set Auto Expose.
Create depth image
If you are or are about landscape photography, please pay particular attention to this, because it is quite easy to apply but create very high efficiency. Use a wide-angle lens, the aperture set at f / 16 or smaller to ensure photos are the focus depth, and produce seamless between foreground and background. If you are taking the place of people who are taken in the foreground, to create a focal point, as well as help the viewer comparable size, the distance between the regions in the image. If the sun is not bright enough, try between f / 16 and use a tripod to avoid vibration.
Use a simple background
Do not complicate the photographer, sometimes the simplest things seemed to always offer the highest efficiency. Do not be too embrace, and cram everything beautiful around you in a photo, choose a subject yourself and set it as the highlight. Then, find an appropriate angle to the rear part of the background as simple as possible confusion support. It will help your photos look more visible, as well as highlighting what you bend shown. Remember that the background color should be harmonious, neutral, avoid bright colors, highlights, and all should be located under the third layout, do not get caught in the middle of the most beautiful pictures.
Do not use Flash in the
Photographed in the room is often underexposed, and many people think of the flash as an ultimate solution. However, sometimes the lights flash to cause unwanted consequences, especially for portraits. If you do not regulate the brightness of the lights, the subject is susceptible to light, and color than usual and virtual. So, if you do not have a dedicated Flash, it's best to restrict Flash toad.
You can exploit the maximum ambient light source to solve this problem. Open the window, move the subject to the proximity of electric light, or the simplest is to increase the ISO and aperture.Often the ISO from 800 to 1600 is the most beautiful indoors, the image bright enough, and limit the noise property. If possible, use a tripod and increasing exposure time is also a good idea.
Select the appropriate ISO
ISO is the sensitivity of the camera. This parameter higher the image as bright, but it is also double-edged sword when at the same time also increases with the hotel. Select the ISO must be based on the actual situation, if you feel not enough light, increase the ISO from 400 to 3200 to choose the most appropriate level, without excessive property. In the full light conditions, or shooting outdoor scenes, the ISO 100 or so Uto are.
Lia machine
Take panning, also known as panning technique is a relatively difficult to apply. You should use this procedure when shooting fast-moving objects, and we need to start strokes. To do this, adjust the shutter speed down two rungs than normal, for example, in case you're shooting with a speed of 1 / 250S then adjusted to 1 / 60s. Then, lock focus on moving subjects to capture, slowly panning in the direction parallel to the subject, and most shutter button. Speaking seems simple, but you need to practice a lot can be mastered.
Do not be afraid to experiment
Hundred or used by hand, with the photograph, too, do not regret the memory capacity or a few rolls of film, go to boldly experiment with what you like, then one day you will find the style and techniques imaging for yourself. With such a shutter speed when shooting in dark conditions, set to the highest speed possible, eg 4s, you will have a beautiful photo exposure. Also on condition that, if to 1 / 250S, photos will be completely different, with the moving object will be replicated in a different way.
According to Genk
No Comment to " Discover the top 10 tips "simple but useful" in photography "